Apr 01, 2006, 10:02 PM // 22:02
|
#21
|
Site Contributor
Join Date: Sep 2005
Location: 38°16′ N 140°52′ E
Profession: Mo/Me
|
Could you buy it online if they didn't carry it? (If we're talking about a chain store...they likely won't.)
Arctic Silver 5
Certainly don't buy any "store-brand" products (CompUSSR thermal grease).
|
|
|
Apr 01, 2006, 10:45 PM // 22:45
|
#22
|
Furnace Stoker
Join Date: Jul 2005
Location: near SF, CA
|
Quote:
Originally Posted by Elisa
My 6800GT is horribly overheating at the moment as well, usually freezes my frames and makes weird artifacts pop up. It runs up to 134 degrees C while playing Guild Wars (even though the GPU is limited to 120C max!)
I don't know anything about changing coolers or adding paste or anything, I've never even looked inside my computer. What do you guys suggest? I feel my card might just burn out in the next couple of weeks.
|
If your video card is still under warranty, contact the manufacturer and see what they recommend.
I had weird artifacting issues happen with my 6800GT combined with an older SiS chipset motherboard. After much experimentation, I cured the problem by speeding up the memory latency timings from CAS 2.5 down to CAS 2 in the BIOS. I guess the 6800GT was a bit too fast for this older system's default settings!
|
|
|
Apr 02, 2006, 08:06 AM // 08:06
|
#23
|
Lion's Arch Merchant
Join Date: Jun 2005
Location: currently Texas =[
Guild: Court Of The Fallen [CotF]
|
Quote:
Originally Posted by Forsythe
My top card idles at around 68 C, under load high 80s, low 90s. Tough little suckers.
|
Your card is going to fry.
|
|
|
Apr 02, 2006, 08:09 AM // 08:09
|
#24
|
Lion's Arch Merchant
Join Date: Jun 2005
Location: currently Texas =[
Guild: Court Of The Fallen [CotF]
|
You need better air flow through your case.
Try mounting some more fans that will creat a "wind tunnel" effect in your case.
The more cool air flowing into the case = the better.
I've got 5 fans on my rig... not including the video card fan, CPU fan, and PSU fans.
|
|
|
Apr 02, 2006, 11:37 AM // 11:37
|
#25
|
Tech Monkeh Mod
Join Date: May 2005
Location: Good Old North East of England
Profession: Mo/Me
|
Narada, your temps are fine, as long as cpu temp is under 50c under load, its fine, airflow is possibly your problem, may need to invest in a case with better airflow.
|
|
|
Apr 02, 2006, 12:33 PM // 12:33
|
#26
|
Academy Page
|
i dont knnow if it was already suggested, but couldnt you use a slot fan?
|
|
|
Apr 02, 2006, 04:19 PM // 16:19
|
#27
|
Lion's Arch Merchant
Join Date: Sep 2005
Location: United States
Guild: Clan Foxrunner
Profession: R/P
|
Quote:
Originally Posted by cannonfodder
Narada, your temps are fine, as long as cpu temp is under 50c under load, its fine, airflow is possibly your problem, may need to invest in a case with better airflow.
|
I'd been thinking about that. As much as I love this case, getting a mid-tower was a bad idea. It's way too cramped, though I re-routed as many wires as I could behind everything on the other side... The only things blocking airflow are the power wires and data cables going to my hard drives, CD and DVD burners, and floppy drive. Do you think I should try the Artic Silver on my GFX card first or do you think that a new case would probably clear up the problems I'm having? I was thinking about trying the Artic Silver first just because that's like $5.00 US whereas a case is ~$100.00 US.
@ OneArmedScissor: I have 5 case fans, 1 for the processor, one for the graphics card, and two on the power supply. I drew an airflow diagram here, would you mind telling me if there's anything you think I should change with it?
|
|
|
Apr 02, 2006, 05:57 PM // 17:57
|
#28
|
Tech Monkeh Mod
Join Date: May 2005
Location: Good Old North East of England
Profession: Mo/Me
|
Nope, I wouldn't try remove gpu heatsink, just to put thermal grease on it, the temps are fine, you may as well invest in a better case, it will cost alot more, but it will stop your problems, as i said the temps are fine. Just out of intrest what is the cpu temp under load?. gpu temps run alot higher than what yours is doing. My X800Xl will go up to 90c before problems arise, not that it's ever gone that high, under load it stays around 50c.
|
|
|
Apr 02, 2006, 07:11 PM // 19:11
|
#29
|
Lion's Arch Merchant
Join Date: Sep 2005
Location: United States
Guild: Clan Foxrunner
Profession: R/P
|
I don't think that the CPU has ever topped 60 degrees Celsius.
|
|
|
Apr 03, 2006, 07:12 PM // 19:12
|
#30
|
Academy Page
|
i dont understand how you guys are getting your tempatures? does everyone have the fan controller with tempature readings, or is there another way???
|
|
|
Apr 03, 2006, 07:34 PM // 19:34
|
#31
|
Forge Runner
Join Date: Nov 2005
Location: Stoke, England
Guild: The Godless [GOD]
Profession: W/
|
Quote:
Originally Posted by TrueNoob
i dont understand how you guys are getting your tempatures? does everyone have the fan controller with tempature readings, or is there another way???
|
I have a LCD panel on the front of my rig that gives me the temps, fan speeds, power consumption and the time. That's how I know mine, at the moment the CPU is at 22.8 degrees, the CPU fan is at 3200rpm and the GPU is at 37 degrees.
|
|
|
Apr 03, 2006, 07:52 PM // 19:52
|
#32
|
Underworld Spelunker
|
Quote:
Originally Posted by Azagoth
I have a LCD panel on the front of my rig that gives me the temps, fan speeds, power consumption and the time. That's how I know mine, at the moment the CPU is at 22.8 degrees, the CPU fan is at 3200rpm and the GPU is at 37 degrees.
|
which water kit?
|
|
|
Apr 03, 2006, 08:03 PM // 20:03
|
#33
|
Lion's Arch Merchant
Join Date: Feb 2006
Location: Honduras
Guild: Ye Old
Profession: W/Mo
|
same problem here i have a x1600 pro iceQ edition an im gettin heating problems
|
|
|
Apr 03, 2006, 11:06 PM // 23:06
|
#34
|
Forge Runner
Join Date: Nov 2005
Location: Stoke, England
Guild: The Godless [GOD]
Profession: W/
|
Quote:
Originally Posted by Loviatar
which water kit?
|
That's an idle temp on air with a 'Vapochill Micro Ultra' CPU cooler. Besides that I also have 2 x 120mm fans and 2 x 80mm fans on the case coupled with some fancy cabling to aid airflow. Under a full load, say playing GW, FEAR, FS2004 or BF2 then the temp never exceeds 34 degrees. That cooler was the best £30 I've spent.
As for liquid cooling, nah I don't trust liquid around electricity no matter how safe people say it is.
|
|
|
Apr 04, 2006, 01:31 AM // 01:31
|
#35
|
Pre-Searing Cadet
Join Date: Apr 2006
Profession: Me/Mo
|
Quote:
Originally Posted by Narada
@ OneArmedScissor: I have 5 case fans, 1 for the processor, one for the graphics card, and two on the power supply. I drew an airflow diagram here, would you mind telling me if there's anything you think I should change with it?
|
Sorry for appearing out of nowhere, but being a physicist and computer engineer in a very hot tropical country, I couldn't resist pointing out that the airflow your case fans create is absolutely the opposite of how it should be! Hot air rises even without convection so the fans that are sucking air into your case from near the top and the back of your CPU are actually returning most of the heat back into your case to effectively broil your PC's innards. The case fans at the front/bottom of your pc are expelling the cold air that is present near the front where the cooler components are. They should instead be forcing air inward, such that they can get cool air from in front and below your tower where no sources of heat are usually present. Try reversing the current directions of your fans. I'm sure the results will be favorable.
|
|
|
Apr 04, 2006, 02:51 AM // 02:51
|
#36
|
Forge Runner
Join Date: Nov 2005
Location: Stoke, England
Guild: The Godless [GOD]
Profession: W/
|
Not another bloody Physicist? Me too, well I have the qualifications but don't work in the field anymore.
As for the case fans, that precisely how mine are set up. The lower two fans 'suck' and the higher ones 'blow'. Plus I have a single 80mm placed into the side panel right above the CPU cooler which sucks out any excess heat that the VapoChill doesn't see to. Not that it needs it. it's a very efficiant cooling solution.
|
|
|
Apr 04, 2006, 12:29 PM // 12:29
|
#37
|
Exclusive Reclusive
Join Date: May 2005
Location: Tuscaloosa, AL
Guild: Seraph's Pinion (wing)
Profession: R/Me
|
That makes three, I design WC loops for fun...
If you have the option, RMA the card. After that, if you get no satisfaction, start looking at case airflow and case design.
|
|
|
Apr 04, 2006, 06:53 PM // 18:53
|
#38
|
Lion's Arch Merchant
Join Date: Feb 2006
Location: Honduras
Guild: Ye Old
Profession: W/Mo
|
well i know that ATI video cards goes on very high temp like the pentium and Nvidea are similar to the AMD.
I Now have a Ati card and before i used and nvidea i never had heat problems but at this moment with the ATi card am having severe problems but im installing more fans ins it.
and probably get a radiator on it.
|
|
|
Apr 05, 2006, 01:37 AM // 01:37
|
#39
|
Pre-Searing Cadet
Join Date: Apr 2006
Profession: Me/Mo
|
is there some weird correlation between physics majors and forum topics about overheating?
Well back to the topic, if the problem still occurs, I'd recommend turning in the videocard. Either that, or getting a new power supply if it doesnt solve it.
|
|
|
Apr 05, 2006, 02:18 AM // 02:18
|
#40
|
Lion's Arch Merchant
Join Date: Jun 2005
Location: Fairfax, VA
Guild: Shadows Of Nightmares (KoN)
Profession: W/
|
Quote:
Originally Posted by sigried
same problem here i have a x1600 pro iceQ edition an im gettin heating problems
|
ICEq is from HiS which runs into problems with their remarketed Arctic Silencer. It's just the HS contact or Fan problem.
My advice, is just pick up a Vanteq Iceberq5 or 4 depending on compatibility off Newegg. Or go for a Zalman fan. This WILL VOID your warranty if you apply it on. However, the cooling is down right amazing, and you can get the blue LED version rofls...... If your card is under warranty, maybe try to get a return. DO NOT BOTHER FOR A RMA, your just going to get some refurbished crap. Just get everything off newegg. The only local store that I know of that stocks AS5 is Microcenter.... Or atleast there's where i got mine.
I don't like paying 5$ shipping for a 1/2 ounce tube....... that costs 7$....
Last edited by Blade Rez; Apr 05, 2006 at 02:20 AM // 02:20..
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Similar Threads
|
Thread |
Thread Starter |
Forum |
Replies |
Last Post |
Looking For A Video Card.
|
l Selling God l |
Technician's Corner |
6 |
Dec 19, 2005 07:47 AM // 07:47 |
video card
|
Ickerus Complex |
Technician's Corner |
1 |
Oct 12, 2005 11:20 PM // 23:20 |
Video Card
|
astokes |
Technician's Corner |
26 |
May 06, 2005 10:09 PM // 22:09 |
What Video Card?
|
Smiggles |
Technician's Corner |
60 |
Apr 13, 2005 06:39 AM // 06:39 |
gwnewbie |
Technician's Corner |
16 |
Apr 12, 2005 08:32 AM // 08:32 |
All times are GMT. The time now is 03:52 PM // 15:52.
|